Coningsby Manufacturing Ltd is a major supplier of welded mesh to British Industry and supplies for every imaginable application from car park security to kennelling, catteries, storage systems, grain tunnels, potato crates, coastal defence gabions, shelving and racking.

CML supply an extensive range of light and heavy gauge welded mesh in both self colour, pre & post galvanised wire. Mesh is usually cut from rolls 120' long from which custom panels are guillotined and flattened to exact sizes. We also supply mesh in 8' x 4' standard panels.

A wide variety of other mesh is available to order in stainless steel and aluminium, we are suppliers of expanded metal in standard 8' x 4' sheets.

Our experienced staff are always pleased to discuss the best way to cut mesh for a particular job and are happy to quote for an individual panel or a pallet of 1000's.

We use thousands of square metres of mesh in our own fabrication shop for kennels catteries and security compounds, if you would like a quote for complete assemblies please telephone our technical sales department.



HEAVY MESH Range - Galvanized after manufacture and self colour finish
2" x 2" x 4.80mm
3" x 3" x 4.80mm
3" x 6" x 4.80mm
75mm x 25mm
x 4.80/3.00mm
1" x 1" x 4.00mm
2" x 1" x 4.00mm
2" x 2" x 4.00mm
3" x 1/2" x 4.00mm
3" x 3" x 4.00mm
1" x 1" x 3.10mm
1 1/2" x 1 1/2" x 3.10mm
2" x 1" x 3.10mm
2" x 2" x 3.10mm
3" x 1/2" x 3.10mm
3" x 1" x 3.10mm
3" x 3" x 3.10mm
4" x 4" x 3.10mm
1" x 1" x 2.50mm
1 1/2" x 1 1/2" x 2.50mm
2" x 1" x 2.50mm
2" x 2" x 2.50mm
3" x 1/2" x 2.50mm
3" x 1" x 2.50mm
Light Mesh Range
Pre-galvanised Mesh
Stainless Steel Mesh
1/4" x 1/4" x 0.70mm
1/2" x 1/2" x 1.00mm
1/2" x 1" x 1.00mm
1" x 1" x 1.00mm
1/2" x 1/2" x 1.60mm
1/2" x 1" x 1.60mm
3/4" x 3/4" x 1.60mm
1" x 1" x 1.60mm
2" x 2" x 1.60mm
2" x 2" x 2.5mm 50mm x 50mm x 2.5mm
2" x 2" x 3.00mm 50mm x 50mm x 3.00mm
Dimensions shown are for Galvanised Wire.
Self Colour Wire Diameter will vary as shown in the mesh Gauges Guide to allow the galvanising process to be compleated.
3" x 1/2" x 3.00mm
1" x 1" x 3.00mm
2" x 2" x 3.00mm
3" x 1/2" x 2.50mm
1" x 1" x 2.50mm
2" x 2" x 2.50mm
1/2" x 1/2" x 1.60mm
1" x 1" x 1.60mm


Mesh Gauges Guide
Mesh Size Range - Weight Guide
To convert the panel weight into Kg/m2 Multiply the Kg/ft2 value by 10.76
Approx. size mm
Self
Coloured
Galvanised
22g
0.66
0.70
19g
0.91
1.00
16g
1.52
1.60
14g
1.93
2.00
12g
2.44
2.50
10g
3.00
3.10
8g
3.88
4.00
6g
4.69
4.80
Approx. weight Kg/ft2
Specification
Self
Coloured
Galvanised
2" x 2" x 4.80mm
0.51
0.52
3" x 3" x 4.80mm
0.34
0.35
3" x 6" x 4.80mm
0.26
0.27
75mm x 25mm x
4.80mm/3.10mm
0.38
0.40
1" x 1" x 4.00mm
0.71
0.74
2" x 1" x 4.00mm
0.52
0.54
2" x 2" x 4.00mm
0.35
0.36
3" x 1/2" x 4.00mm
0.80
0.83
3" x 3" x 4.00mm
0.23
0.24
1" x 1" x 3.10mm
0.41
0.43
11/2" x 11/2" x 3.10mm
0.28
0.29
Approx. weight Kg/ft2
Specification
Self
Coloured
Galvanised
2" x 1" x 3.10mm
0.31
0.33
2" x 2" x 3.10mm
0.21
0.22
3" x 1/2" x 3.10mm
0.48
0.50
3" x 1" x 3.10mm
0.28
0.29
3" x 3" x 3.10mm
0.14
0.15
4" x 4" x 3.10mm
0.11
0.12
1" x 1" x 2.50mm
0.27
0.29
11/2" x 11/2" x 2.50mm
0.18
0.19
2" x 1" x 2.50mm
0.20
0.22
2" x 2" x 2.50mm
0.14
0.15
3" x 1/2" x 2.50mm
0.32
0.34
3" x 1" x 2.50mm
0.18
0.19

Quality Standards
Gauge Sizes
Dimensions shown are for galvanised wire. Weldmesh self-colour specifications will vary between 0.04mm and 0.12mm below the galvanised wire dimension as shown in the Weidmesh Gauges Guide.

Galvanised Mesh
The bulk of galvanised Mesh is hot dip galvanised to the highest standards and conforms to BS EN 10244-2 Class A (replaces BS443). Should a thicker coat be necessary, ie. BS EN ISO 1461 (replaces BS729), this can be obtained on request. Pre-galvanised Mesh (mesh made from galvanised wire) can also be produced on request.

Tolerances
The following criteria should be used for
measuring rolls of Mesh.

a) Cumulative line wire and cross wire spacings must be within + or - 2mm per foot. eg:
1ft of mesh + or -
(2mm)
2ft of mesh + or - (1/8")
(3mm)
3ft of mesh + or - (3/16")
(5mm)
4ft of mesh + or - (1/4")
(6mm)
5ft of mesh + or - (5/16")
(8mm)
6ft - 12ft + or - (1/2")
(12mm)
b) Individual mesh spacings must be within:
+ or - 1/16" on 3/4" mesh and above + or - 1/32" (1mm) on 1/2" mesh up to 3/4".
c) At all times the aperture count must be correct.
d) a mximum tolerance allowed on any length of mesh + or - 1/2" for rolls.
e) Squareness is assessed by taking the difference in diagonal measurements. (see diagram on the right).

Squareness = difference between (a) and (b) where X = roll width.
Squareness tolerances as follows:
X is panel width/length measured panel
Maximum allowable difference between (a)
and (b) in diagonal measurements
12" x 12"
1/8"
(3mm)
24" x 24"
1/8"
(3mm)
36" x 36"
1/8"
(3mm)
42" x 42"
5/32"
(4mm)
48" x 48"
3/16"
(5mm)
72" x 72"
1/4"
(6mm)
84" x 84"
5/16"
(8mm)


Coningsby Manufacturing Ltd., 65 Park Lane, Coningsby, Lincolnshire LN4 4SL
Tel: + 44 (0)1526 342141 Fax: + 44 (0)1526 346956
Reg No. 1293927 England
Copyright © Coningsby Manufacturing Ltd. 2009 all rights reserved.
Site created and hosted by laserdesigns www.laserdesigns.co.uk